Series and Parallel Circuits: Identify Connections First
Series means one unbranched path; parallel means the same two nodes. Compare the same resistors under both connections.
Nearby on the page does not mean connected in series
Identify nodes joined by ideal wire before classifying the circuit. Series resistors share one unbranched current path. Parallel resistors connect across the same two nodes and share a voltage. Their orientation or distance on the drawing does not decide the connection.
The same 6 Ω and 3 Ω resistors, two outcomes
Assume an ideal 12 V source, ideal wires and fixed ohmic resistors, with no source internal resistance.
| Connection | Equivalent resistance | Source current | Individual resistors |
|---|---|---|---|
| Series | 6+3=9 Ω | 12/9=4/3 A | 8 V across 6 Ω; 4 V across 3 Ω |
| Parallel | (1/6+1/3)⁻¹=2 Ω | 12/2=6 A | 12 V each; branch currents 2 A and 4 A |
Series voltages sum to 12 V; parallel branch currents sum to 6 A. These checks catch confusion between equal voltage and equal current.
Redraw in three steps
Label nodes, merging points connected by continuous ideal wire. Record the two nodes attached to every component. Then redraw those connections while preserving branches. Two components sharing one node are not necessarily in series if a third branch leaves that junction.
Here, the parallel equivalent of 2 Ω is below the smallest branch resistance of 3 Ω. The series equivalent of 9 Ω exceeds either positive resistance. These are useful magnitude checks, not permission to apply a simple resistor model to nonlinear components or more complex sources.
Check yourself: a 6 Ω resistor alone across the ideal 12 V source draws 2 A. Adding a parallel 3 Ω branch raises total current to 6 A while the original branch still draws 2 A. Total current changes; not every branch current increases.