Velocity–Time Graphs: Slope, Area and Signs

Read acceleration from slope and displacement from signed area, then use absolute area to find distance.

Illustration: Velocity–Time Graphs: Slope, Area and Signs

One graph, three questions

Check the axes first: time t in seconds horizontally, velocity v in m/s vertically. The following rules belong to a velocity–time graph; do not transfer its area rule to a position–time graph.

Consider a piecewise-linear graph. Velocity stays at +4 m/s from 0 to 3 s, then decreases linearly to −4 m/s at 7 s. It crosses zero at 5 s.

IntervalSlope / accelerationSigned area / displacement
0–3 s0+12 m
3–5 s−2 m/s²+4 m
5–7 s−2 m/s²−4 m

Total displacement is 12+4−4=12 m. Distance is 12+4+4=20 m. Average velocity is 12/7 m/s; average speed is 20/7 m/s.

A negative sign does not always mean slowing

Acceleration is negative throughout the second segment. Speed decreases from 3 to 5 s, when velocity is positive, then increases from 5 to 7 s, when velocity is negative. Below the time axis means motion in the negative direction, not negative distance. Graph height gives velocity, not acceleration. A horizontal line may represent steady motion at a nonzero speed.

At the ideal corner at 3 s, the slopes on either side differ. There is no unique derivative there; the table reports acceleration inside each segment.

Check with units

Slope has units (m/s)/s=m/s². Area has units (m/s)×s=m. To find distance, split at every zero crossing and add the absolute areas.

For 3–7 s alone, displacement is zero but distance is 8 m. The object moves forward and then backward.

Velocity is 4 m/s from 0 to 3 s, then decreases linearly to −4 m/s at 7 s, crossing zero at 5 s. Signed areas are +12, +4 and −4 m.
Velocity–time graph: signed area totals 12 m of displacement; absolute areas total 20 m of distance.